MS28060 Portal Crane is lifting appliance for factory installation. In order to reduce wind load, the crane adopts straight jib made of seamless steel tube and makes load move along the horizontal line when luffing, which realizes the operation stable and reliable and saves luffing efficiency. In order to improve working efficiency, the crane is equipped with main and auxiliary hoisting mechanism. Besides, the crane can slew and hoist at any angle or luffing linkage, thus the crane can finish the operation at the shortest motion route with higher efficiency.

Travelling mechanism is workability structure for crane moving or lifting operation.

Parameters: Hoisting capacity:

Main hook: 280t, 250t, 150t, 60t

Aux hook: 30t

Working radius (Max): 18m, 25m, 40m, 55m, 60m

Working radius (Min): 18m, 22m

Lift height: Above rail 65/45m, Below rail10m, Working speed, Hoisting

Main hook：3m/min

Aux hook：25m/min

Luffing: 5m/min

Slewing: 0.20rpm

Travelling: 26m/min

Track gauge x rail base: 10.5m×18m

Rear swing radius: 15m

Gantry clearance height: 9.5m

Max. wheel pressure: ≤30t

Installed total power: 636KW

Power supply

Three wire three phase, 380V, 50Hz (S3 40%)

Power supply mode/travelling distance

Cable drum/±150m

Overall weight: ~ 1000t